How To Make A Wig Cap

Download Article

Download Article

Wig making takes a lot of time, but the results are worth information technology. While you can always buy a pre-fabricated cap to sew together or ventilate the fibers onto, there is no guarantee that information technology will fit you. Making your own wig cap will ensure that you have a good base that fits you perfectly. For that, however, you volition either demand a custom-sized wig head or modify an existing wig head to match your measurements. If you piece of work off of a standard wig head, the wig cap (and resulting wig) may stop upwardly being too pocket-size!^[1]

1. 1

   Pull your hair back in the aforementioned way you'll be wearing information technology nether the wig. Some people like to create 1 to 2 French braids, while other people adopt cornrows. How you braid your hair now is very important, because information technology will affect the size and shape of the wig cap.^[2]

   • You need to have a mold of your head in guild to modify the wig head. If you don't do this, the cap for your wig will non fit you.^[3]
   • If you already own a canvas head for wig making that has the aforementioned measurements equally your head, you can skip this part and click hither to go on.

2. 2

   Embrace your hair with plastic wrap. Be certain to extend the plastic wrap past your hairline. This includes your ears, forehead, and nape. Extending the plastic wrap past your hairline will reduce the chances of the record sticking to your hair in the later steps.^[4]

   • Use clear plastic wrap, if yous can. Information technology will make the later steps easier.
   • If you lot have a nylon wig cap to habiliment under your wig, it would be a good thought to put it on beginning.
   • If the plastic wrap is slipping around as well much, secure it to your forehead with a piece of scotch record.

   Advertisement

3. 3

   Embrace the plastic wrap with two layers of articulate packaging tape. Wrap the tape around your hairline commencement, taking care to avert the peel. Cover the rest of the plastic wrap in overlapping rows of tape. Practise this pace twice. At that place should be no soft spots left. If you experience a soft spot, that means you missed the plastic wrap. Comprehend information technology with a piece of tape!^[5]

   • The taped plastic will have some give to it, which is fine. It should not be soft, similar cloth.
   • You need to use articulate packaging tape, otherwise you won't be able to see your hairline in the next step.

4. 4

   Trace your hairline and ears with a permanent marker. It would be a good idea to get someone to assistance you with this, especially when you reach the back. If you were to look at yourself in the mirror, you should exist able to run across your hairline through the taped plastic wrap. Trace all around your hairline, from forehead to nape. Be certain to include your ears as well.^{[half dozen]}

   • Don't worry about getting the marker on your skin or hair. This is why you extended the plastic wrap by your hairline!
   • If y'all don't take a helper, turn your dorsum to a mirror, and agree a smaller mirror up in front end of you so that you can meet the back of your head.

5. five

   Remove the record-covered plastic wrap. You lot should be able to only slide information technology off of your head. If y'all can't, dip your finger in water, then run it along the inside border of the cap to split up it from your peel.^[7]

   • If you still can't get the plastic off, advisedly cut a slit into it (preferably the back), so slide it off.
   • If you put a nylon wig cap before, it may come off with the plastic wrap mold. But peel it abroad.

6. half dozen

   Employ a pair of scissors to cutting off the excess tape and plastic wrap. Follow the line that you drew with a mark, leaving a ¹⁄_ii to 1 in (1.3 to ii.5 cm) border. Brand certain that yous cut out the ears equally well. When you are done, you should have a cap that fits perfectly on your head, and follows your hairline and ears.^[viii]

7. vii

   Reinforce the inside of the plastic mold with more than record. If you cut a slit into the mold, you lot will need to shut it upward and tape it outset. Next, cut off smaller pieces of tape, and use them to cover the within of the mold, overlapping them as you get. If you want a nicer finish, yous can wrap tape around the cut edges of the cap.^[9]

Advertisement

1. 1

   Get a Styrofoam wig head. You can purchase Styrofoam wig heads online, in well-stocked arts and crafts shops, wig shops, and in come beauty supply stores.

2. 2

   Place the wig head onto a wig stand. Yous can observe wig stands online and in wig shops or some beauty supply shops. It tin can be the tall kind that y'all put on your floor, or the shorter kind that you mountain onto the table.

   • If y'all don't have a wig stand up, insert a dowel into a Christmas tree stand, and utilize that instead. You can likewise insert it into a bucket filled with rocks.
   • If you need a tabletop DIY wig stand, you can use a paper towel holder instead. You may accept to break off the outer stick that touches the outside of the paper towel, yet.

3. iii

   Pad the within of your caput mold and so that it will fit the wig head. You can do this with polyester stuffing, paper towels, or fifty-fifty cotton pads. How much you pad it depends on how large your head is compared to the wig head. Most Styrofoam wig heads are modest, and so y'all may demand to pad your mold a lot.^[ten]

   • If you choose to use paper towels or even pieces of paper, be sure to crush them and not fold them. This will make it easier to insert the pins after.^[11]

4. 4

   Slide the head mold onto the wig caput, and add together more padding if needed. Slip the mold with the padding onto the wig head. Information technology should be padded enough to feel firm when you touch on it, without a lot of give. If yous see whatever buckling, you lot will need to pad the mold out some more than.

5. 5

   Secure the caput mold to the wig caput with pins. Place the pins right along the edges of the mold, beneath the fatigued hairline. It would be best if y'all use the simple, all-metal pins that expect like nails. If you use the kind with circular, plastic or glass beads on the ends, you will accept a hard time fitting the netting for the wig cap. Once you do this, you are now ready to make a wig cap.

   • Y'all can also secure the head mold to the wig head with tape. Masking record volition work the all-time for this. If you lot cover up your drawn hairline, be sure to re-trace it.^[12]

Advertisement

1. 1

   Buy a weaving cyberspace from a wig making supply store. Information technology would exist even better if yous bought ii weaving nets, and stacked them together. This will requite you a sturdier base. You lot tin buy weaving nets online and from shops that sell wig making supplies.^[13]

   • If you are buying netting from a fabric store, y'all demand plenty to curtain over your head and cover the hairline, plus a few inches/centimeters actress.
   • You tin can as well use French lace, or other types of lace used for wig making. If y'all volition be ventilating your wig, you lot should get ventilating lace.

2. ii

   Pull the netting taut beyond the brow and secure it with sewing pins. Mantle the netting over the wig head, with the forepart edge 1 to ii inches (2.5 to five.i cm) beneath the drawn hairline. Pull the netting taut across the forehead, and secure it with sewing pins. Yous will need a pin at the front-center of the netting every bit well as a pin at each temple.^[14]

   • Insert the pins at a slight angle; this will help prevent the netting from slipping by the pin heads.

3. 3

   Repeat the process for the back of the wig head. Move towards the back of the wig caput. Pull the netting down until it is taut across the acme of the caput. Secure it to the nape with more sewing pins. Identify the pins near 1 inch (ii.5 cm) below the drawn hairline.^[15]

4. 4

   Secure the sides of the netting over the ears. Pull down on the netting as you pin then that information technology is nice and snug. You lot need a pivot in front of and behind each ear pigsty. Make certain that the lace is going past the hairline. If it isn't, it is either off-eye or too narrow.^[16]

   • If the lace is too narrow, you will need to cut a larger piece and get-go once again.
   • If the lace is off-center, yous need to re-position information technology and re-pin it.

5. v

   Pinch the netting to create darts and a tighter fit. Y'all will need to create a dart in forepart and behind each ear. Pinch the edges of the netting so that it lays smoothly against the wig caput. Secure the dart with pins, following the bend of the wig head. When you are done, your netting should be laying smoothly across the top of the wig head.^[17]

   • Make sure that you are merely pinning through the netting. Don't insert the pins into the wig head.

Advertizement

1. one

   Remove the border pins, then pull the wig cap off of the wig head. Remove the pins securing the netting to the wig caput, then slip it off. Do not remove the pins holding the darts together. Do not remove the mold you pinned before to the wig head.^[18]

2. 2

   Run up the darts using the pins y'all inserted equally a guide. You tin can practise this on a sewing automobile, a serger, or by manus. If you are using a sewing auto, be sure to backstitch at the start and end of your sewing. Remove the pins as you sew, and make sure to use a thread colour that matches the lace.^[nineteen]

3. 3

   Cut downward the seams. If you lot sewed the darts on a sewing automobile or by hand, you will still have triangular flaps sticking out of the seams. Cut these downwards until the seams are ¹⁄₄ to ^ane⁄₂ inch (0.64 to ane.27 cm) wide.

   • Skip this stride if you used a serger, as the machine will have already done this for y'all.

4. 4

   Get over the raw edges using a zigzag run up, if desired. Y'all don't have to do this, especially if you lot used a serger, just it volition give you a nicer stop. Remember to use a matching thread color and to backstitch (if you are using a sewing machine).

   • Skip this stride if you used a serger. The seams are already finished.

5. 5

   Trim off any loose threads. Go over your wig cap and cut off any loose or hanging threads. If you want an even nicer finish, consider tacking down the seams past hand so that they lay flat.

6. 6

   Finish the wig cap as desired. At this point, yous can trim off the backlog lace to match the hairline. You tin can also hem the lace, as desired, or sew in an elastic. Yous can too sew a stretch or ventilating panel to the acme, then cutting the netting out from under it.^[20]

   • If you are making a lace front wig, practise not trim off the backlog lace along the front hairline. You will demand this to glue the wig downward.

Advertisement

Ask a Question

200 characters left

Include your e-mail address to go a message when this question is answered.

Submit

Advertisement

• You can find many of the supplies in beauty supply shops and wig shops. Online stores that specialize in wig making supplies may as well carry the products that you need.

• The exact type of lace you use depends on the type of wig you are making. If yous are just sewing tracks onto the wig, weaving lace volition work but fine. If you are making a ventilated wig, you'll demand something finer.

Cheers for submitting a tip for review!

Advertisement

Things You'll Need

• Nylon wig cap (optional)
• Plastic wrap
• Clear packaging tape
• Permanent marker
• Scissors
• Styrofoam wig caput
• Wig stand
• Sewing pins
• Weaving netting, ventilating lace, etc.
• Sewing machine
• Thread

Well-nigh This Article

Thank you to all authors for creating a page that has been read 48,241 times.

Did this article help yous?

Source: https://www.wikihow.com/Make-a-Cap-for-Wigs

Share this post